AnasSarkiz/usb-c-pwm-pa25
A component library defining an AO3400A N-channel MOSFET, 47 µF polarized capacitor, 3-pin through-hole connector, and 9.1 V Zener diode with PCB footprints and 3D CAD models.
- Version
- 0.1.0-prototype.2
- License
- unset
- Stars
- 0
output/pcb-review/README.md
# Rejected PCB previews
These native four-layer renders are for diagnosis and review only. They are not fabrication approval and are not photographs.
The emitted board fails a Gerber-level short check, 15 drill-to-pad clearance pairs and the 0.15 mm minimum trace width. The native DRC also crashes. All four previews and the short debug image were inspected; visible ground coverage or a clean-looking render cannot override these failures. See the project VALIDATION.md and docs/TOOLING_BLOCKERS.md.
No Gerber fabrication ZIP or approved CPL is included. Do not manufacture this revision.
Related Packages
More from this authorAnasSarkiz/rp2040-usb-c-single-axis-dm542t-motion-controller--01a0e89cA USB‑C RP2040 controller board with external QSPI flash, crystal clock, regulated 3.3/1.1/5 V power, boost-converted motor-driver supply, protected USB and limit inputs, status LEDs, reset/boot switches, and AO3400A MOSFET outputs for stepper-control signals.
Similar packageShiboSoftwareDev/nema8-20mm-dual-usbc-stepper-controllerBAT54C is a compact three-pin SMD dual Schottky diode, while BAT54WS is a two-pin SMD single Schottky diode, each with defined PCB footprints and 3D models.
Discover something newpixalynx/usb3-hub-10gA USB 3.2 Gen 2 six-port hub board with USB-C PD power input, regulated 5 V/3.3 V/1.15 V rails, one upstream and four protected downstream USB-A/USB-C ports, SuperSpeed muxes, ESD protection, and controlled port power.