AnasSarkiz/usb-c-pwm-pa25
A component library defining an AO3400A N-channel MOSFET, 47 µF polarized capacitor, 3-pin through-hole connector, and 9.1 V Zener diode with PCB footprints and 3D CAD models.
- Version
- 0.1.0-prototype.2
- License
- unset
- Stars
- 0
imports/TPS25730DREFR.tsx
import type { ChipProps } from "@tscircuit/props";
import modelUrl from "../assets/ti-ref0038a.glb";
const pinLabels = {
pin1: ["LDO_3V3"],
pin2: ["ADCIN1"],
pin3: ["ADCIN2"],
pin4: ["LDO_1V5"],
pin5: ["ADCIN3"],
pin6: ["CAP_MIS"],
pin7: ["ADCIN4"],
pin8: ["I2Ct_SDA"],
pin9: ["I2Ct_SCL"],
pin10: ["DBG_ACC"],
pin11: ["GND1"],
pin12: ["GND2"],
pin13: ["PLUG_FLIP"],
pin14: ["GND3"],
pin15: ["DRAIN1"],
pin16: ["GND4"],
pin17: ["GND5"],
pin18: ["N_FAULT_IN"],
pin19: ["N_SINK_EN"],
pin20: ["PPHV1"],
pin21: ["PPHV2"],
pin22: ["PPHV3"],
pin23: ["VBUS_IN1"],
pin24: ["VBUS_IN2"],
pin25: ["VBUS_IN3"],
pin26: ["RESERVED1"],
pin27: ["RESERVED2"],
pin28: ["CC1"],
pin29: ["CC2"],
pin30: ["DRAIN2"],
pin31: ["GND6"],
pin32: ["VBUS1"],
pin33: ["VBUS2"],
pin34: ["GND7"],
pin35: ["GND8"],
pin36: ["RESERVED3"],
pin37: ["PLUG_EVENT"],
pin38: ["VIN_3V3"],
pin39: ["GND9"],
pin40: ["DRAIN3"],
} as const;
const pinAttributes = {
pin11: {
requiresGround: true,
},
pin12: {
requiresGround: true,
},
pin14: {
requiresGround: true,
},
pin16: {
requiresGround: true,
},
pin17: {
requiresGround: true,
},
pin31: {
requiresGround: true,
},
pin34: {
requiresGround: true,
},
pin35: {
requiresGround: true,
},
pin39: {
requiresGround: true,
},
pin1: {
providesPower: true,
},
pin2: {
isInput: true,
},
pin3: {
isInput: true,
},
pin4: {
providesPower: true,
},
pin5: {
isInput: true,
},
pin6: {
isOutput: true,
canUseOpenCollector: true,
isUsingOpenCollector: true,
},
pin7: {
isInput: true,
},
pin8: {
isBidirectional: true,
canUseOpenCollector: true,
isUsingOpenCollector: true,
},
pin9: {
isInput: true,
},
pin10: {
isOutput: true,
canUseOpenCollector: true,
isUsingOpenCollector: true,
},
pin13: {
isOutput: true,
canUseOpenCollector: true,
isUsingOpenCollector: true,
},
pin18: {
isInput: true,
},
pin19: {
isOutput: true,
canUseOpenCollector: true,
isUsingOpenCollector: true,
},
pin20: {
providesPower: true,
},
pin21: {
providesPower: true,
},
pin22: {
providesPower: true,
},
pin23: {
requiresPower: true,
},
pin24: {
requiresPower: true,
},
pin25: {
requiresPower: true,
},
pin26: {
isInput: true,
},
pin27: {
isInput: true,
},
pin28: {
isBidirectional: true,
},
pin29: {
isBidirectional: true,
},
pin32: {
requiresPower: true,
},
pin33: {
requiresPower: true,
},
pin36: {
isInput: true,
},
pin37: {
isOutput: true,
canUseOpenCollector: true,
isUsingOpenCollector: true,
},
pin38: {
isPassive: true,
},
} as const;
export const TPS25730DREFR = (props: ChipProps<typeof pinLabels>) => {
return (
<chip
pinLabels={pinLabels}
pinAttributes={pinAttributes}
supplierPartNumbers={{
jlcpcb: ["C22438973"],
}}
manufacturerPartNumber="TPS25730DREFR"
footprint={
<footprint>
<smtpad
portHints={["pin1"]}
pcbX="-2.8999942mm"
pcbY="0.999998mm"
width="0.5999988mm"
height="0.1999996mm"
shape="rect"
/>
<smtpad
portHints={["pin2"]}
pcbX="-2.8999942mm"
pcbY="0.599948mm"
width="0.5999988mm"
height="0.1999996mm"
shape="rect"
/>
<smtpad
portHints={["pin3"]}
pcbX="-2.8999942mm"
pcbY="0.199898mm"
width="0.5999988mm"
height="0.1999996mm"
shape="rect"
/>
<smtpad
portHints={["pin4"]}
pcbX="-2.8999942mm"
pcbY="-0.199898mm"
width="0.5999988mm"
height="0.1999996mm"
shape="rect"
/>
<smtpad
portHints={["pin5"]}
pcbX="-2.8999942mm"
pcbY="-0.599948mm"
width="0.5999988mm"
height="0.1999996mm"
shape="rect"
/>
<smtpad
portHints={["pin6"]}
pcbX="-2.8999942mm"
pcbY="-0.999998mm"
width="0.5999988mm"
height="0.1999996mm"
shape="rect"
/>
<smtpad
portHints={["pin7"]}
pcbX="-2.400046mm"
pcbY="-1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin8"]}
pcbX="-1.999996mm"
pcbY="-1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin9"]}
pcbX="-1.599946mm"
pcbY="-1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin10"]}
pcbX="-1.199896mm"
pcbY="-1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin11"]}
pcbX="-0.8001mm"
pcbY="-1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin12"]}
pcbX="-0.40005mm"
pcbY="-1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin13"]}
pcbX="0mm"
pcbY="-1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin14"]}
pcbX="0.40005mm"
pcbY="-1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin15"]}
pcbX="0.8001mm"
pcbY="-1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin16"]}
pcbX="1.199896mm"
pcbY="-1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin17"]}
pcbX="1.599946mm"
pcbY="-1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin18"]}
pcbX="1.999996mm"
pcbY="-1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin19"]}
pcbX="2.400046mm"
pcbY="-1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin20"]}
pcbX="2.8999942mm"
pcbY="-1.1249914mm"
width="0.5999988mm"
height="0.2199894mm"
shape="rect"
/>
<smtpad
portHints={["pin21"]}
pcbX="2.8999942mm"
pcbY="-0.675005mm"
width="0.5999988mm"
height="0.2199894mm"
shape="rect"
/>
<smtpad
portHints={["pin22"]}
pcbX="2.8999942mm"
pcbY="-0.2249932mm"
width="0.5999988mm"
height="0.2199894mm"
shape="rect"
/>
<smtpad
portHints={["pin23"]}
pcbX="2.8999942mm"
pcbY="0.2249932mm"
width="0.5999988mm"
height="0.2199894mm"
shape="rect"
/>
<smtpad
portHints={["pin24"]}
pcbX="2.8999942mm"
pcbY="0.675005mm"
width="0.5999988mm"
height="0.2199894mm"
shape="rect"
/>
<smtpad
portHints={["pin25"]}
pcbX="2.8999942mm"
pcbY="1.1249914mm"
width="0.5999988mm"
height="0.2199894mm"
shape="rect"
/>
<smtpad
portHints={["pin26"]}
pcbX="2.400046mm"
pcbY="1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin27"]}
pcbX="1.999996mm"
pcbY="1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin28"]}
pcbX="1.599946mm"
pcbY="1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin29"]}
pcbX="1.199896mm"
pcbY="1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin30"]}
pcbX="0.8001mm"
pcbY="1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin31"]}
pcbX="0.40005mm"
pcbY="1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin32"]}
pcbX="0mm"
pcbY="1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin33"]}
pcbX="-0.40005mm"
pcbY="1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin34"]}
pcbX="-0.8001mm"
pcbY="1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin35"]}
pcbX="-1.199896mm"
pcbY="1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin36"]}
pcbX="-1.599946mm"
pcbY="1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin37"]}
pcbX="-1.999996mm"
pcbY="1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin38"]}
pcbX="-2.400046mm"
pcbY="1.8999962mm"
width="0.1999996mm"
height="0.5999988mm"
shape="rect"
/>
<smtpad
portHints={["pin39"]}
pcbX="-0.9649968mm"
pcbY="0mm"
width="2.6500074mm"
height="2.6500074mm"
shape="rect"
/>
<smtpad
portHints={["pin35"]}
points={[
{ x: "-0.6999986mm", y: "1.959991mm" },
{ x: "-0.6999986mm", y: "1.5999968mm" },
{ x: "-1.2999974mm", y: "1.5999968mm" },
{ x: "-1.2999974mm", y: "1.959991mm" },
{ x: "-0.6999986mm", y: "1.959991mm" },
]}
shape="polygon"
/>
<smtpad
portHints={["pin33"]}
points={[
{ x: "0.0998474mm", y: "1.9599656mm" },
{ x: "0.0998474mm", y: "1.5999968mm" },
{ x: "-0.5001514mm", y: "1.5999968mm" },
{ x: "-0.5001514mm", y: "1.9599656mm" },
{ x: "0.0998474mm", y: "1.9599656mm" },
]}
shape="polygon"
/>
<smtpad
portHints={["pin25"]}
points={[
{ x: "2.959989mm", y: "1.2349988mm" },
{ x: "2.959989mm", y: "0.1149858mm" },
{ x: "2.5999948mm", y: "0.1149858mm" },
{ x: "2.5999948mm", y: "1.2349988mm" },
]}
shape="polygon"
/>
<smtpad
portHints={["pin22"]}
points={[
{ x: "2.959989mm", y: "-0.1149858mm" },
{ x: "2.959989mm", y: "-1.2349988mm" },
{ x: "2.5999948mm", y: "-1.2349988mm" },
{ x: "2.5999948mm", y: "-0.1149858mm" },
]}
shape="polygon"
/>
<smtpad
portHints={["pin40"]}
pcbX="1.5599918mm"
pcbY="0mm"
width="1.5299944mm"
height="2.6500074mm"
shape="rect"
/>
<silkscreenpath
route={[
{ x: 2.999994000000015, y: 1.415135599999985 },
{ x: 2.999994000000015, y: 1.9999959999999817 },
]}
/>
<silkscreenpath
route={[
{ x: 2.680182599999995, y: -1.99999600000001 },
{ x: 2.999994000000015, y: -1.99999600000001 },
{ x: 2.999994000000015, y: -1.4151356000000135 },
]}
/>
<silkscreenpath
route={[
{ x: -2.999994000000015, y: -1.280134600000011 },
{ x: -2.999994000000015, y: -1.99999600000001 },
{ x: -2.680182599999995, y: -1.99999600000001 },
]}
/>
<silkscreenpath
route={[
{ x: -2.680182599999995, y: 1.9999959999999817 },
{ x: -2.999994000000015, y: 1.9999959999999817 },
{ x: -2.999994000000015, y: 1.2801345999999967 },
]}
/>
<silkscreenpath
route={[
{ x: 2.999994000000015, y: 1.9999959999999817 },
{ x: 2.680182599999995, y: 1.9999959999999817 },
]}
/>
<silkscreencircle
pcbX="-3.499993mm"
pcbY="1.499997mm"
radius="0.0999998mm"
/>
<silkscreentext
text="{NAME}"
pcbX="-0.2031746mm"
pcbY="3.2098254mm"
anchorAlignment="center"
fontSize="1mm"
/>
<courtyardoutline
outline={[
{ x: -3.8567745999999943, y: 2.4598253999999855 },
{ x: 3.4504254000000145, y: 2.4598253999999855 },
{ x: 3.4504254000000145, y: -2.4343746000000124 },
{ x: -3.8567745999999943, y: -2.4343746000000124 },
{ x: -3.8567745999999943, y: 2.4598253999999855 },
]}
/>
</footprint>
}
cadModel={{
glbUrl: modelUrl,
modelOriginPosition: { x: 0, y: 0, z: 0 },
size: { x: 6, y: 4, z: 0.75 },
pcbRotationOffset: 0,
}}
{...props}
/>
);
};
Related Packages
More from this authorAnasSarkiz/rp2040-usb-c-single-axis-dm542t-motion-controller--01a0e89cA USB‑C RP2040 controller board with external QSPI flash, crystal clock, regulated 3.3/1.1/5 V power, boost-converted motor-driver supply, protected USB and limit inputs, status LEDs, reset/boot switches, and AO3400A MOSFET outputs for stepper-control signals.
Similar packageShiboSoftwareDev/nema8-20mm-dual-usbc-stepper-controllerBAT54C is a compact three-pin SMD dual Schottky diode, while BAT54WS is a two-pin SMD single Schottky diode, each with defined PCB footprints and 3D models.
Discover something newpixalynx/usb3-hub-10gA USB 3.2 Gen 2 six-port hub board with USB-C PD power input, regulated 5 V/3.3 V/1.15 V rails, one upstream and four protected downstream USB-A/USB-C ports, SuperSpeed muxes, ESD protection, and controlled port power.