AnasSarkiz/rp2040-usb-c-single-axis-dm542t-motion-controller--01a0e89c

A USB‑C RP2040 controller board with external QSPI flash, crystal clock, regulated 3.3/1.1/5 V power, boost-converted motor-driver supply, protected USB and limit inputs, status LEDs, reset/boot switches, and AO3400A MOSFET outputs for stepper-control signals.

Version
0.1.0-prototype.19
License
unset
Stars
0

imports/TPS63030DSKR.tsx

import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["VOUT"],
  pin2: ["L2"],
  pin3: ["PGND"],
  pin4: ["L1"],
  pin5: ["VIN"],
  pin6: ["EN"],
  pin7: ["pin7"],
  pin8: ["VINA"],
  pin9: ["GND"],
  pin10: ["FB"],
  pin11: ["EP"]
} as const

const pinAttributes = {
  pin3: {requiresGround: true},
  pin5: {requiresPower: true},
  pin9: {requiresGround: true}
} as const

export const TPS63030DSKR = (props: ChipProps<typeof pinLabels>) => {
  return (
    <chip
      pinLabels={pinLabels}
      pinAttributes={pinAttributes}
      supplierPartNumbers={{
  "jlcpcb": [
    "C12462"
  ]
}}
      manufacturerPartNumber="TPS63030DSKR"
      footprint={<footprint>
        <smtpad portHints={["pin1"]} pcbX="-1.157478mm" pcbY="0.999998mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin2"]} pcbX="-1.157478mm" pcbY="0.499872mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin3"]} pcbX="-1.157478mm" pcbY="0mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin4"]} pcbX="-1.157478mm" pcbY="-0.500126mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin5"]} pcbX="-1.157478mm" pcbY="-0.999998mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin10"]} pcbX="1.157478mm" pcbY="0.999998mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin9"]} pcbX="1.157478mm" pcbY="0.499872mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin8"]} pcbX="1.157478mm" pcbY="0mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin7"]} pcbX="1.157478mm" pcbY="-0.500126mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin6"]} pcbX="1.157478mm" pcbY="-0.999998mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin11"]} pcbX="0mm" pcbY="0mm" width="1.1999976mm" height="1.999996mm" shape="rect" />
<fabricationnotepath route={[{"x":-1.326210200000105,"y":1.326210200000105},{"x":1.3262101999999913,"y":1.326210200000105}]} />
<fabricationnotepath route={[{"x":1.3262101999999913,"y":-1.326210200000105},{"x":-1.326210200000105,"y":-1.326210200000105}]} />
<silkscreencircle pcbX="-1.95mm" pcbY="0.999998mm" radius="0.100076mm" strokeWidth="0.15mm" />
<fabricationnotetext text={props.name} pcbX="-0.1905mm" pcbY="2.3208mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-2.129600000000096,"y":1.570799999999963},{"x":1.7486000000000104,"y":1.570799999999963},{"x":1.7486000000000104,"y":-1.5708000000000766},{"x":-2.129600000000096,"y":-1.5708000000000766},{"x":-2.129600000000096,"y":1.570799999999963}]} />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C12462.obj?uuid=12c631ea46604e478703d8e42e76d1d7",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C12462.step?uuid=12c631ea46604e478703d8e42e76d1d7",
        pcbRotationOffset: 0,
        modelOriginPosition: { x: 0, y: 0.000012699999842880061, z: 0 },
      }}
      {...props}
    />
  )
}