AnasSarkiz/rp2040-usb-c-single-axis-dm542t-motion-controller--01a0e89c

A USB‑C RP2040 controller board with external QSPI flash, crystal clock, regulated 3.3/1.1/5 V power, boost-converted motor-driver supply, protected USB and limit inputs, status LEDs, reset/boot switches, and AO3400A MOSFET outputs for stepper-control signals.

Version
0.1.0-prototype.19
License
unset
Stars
0

imports/TPS22918DBVR.tsx

import type { SwitchProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["VIN"],
  pin2: ["GND"],
  pin3: ["ON"],
  pin4: ["CT"],
  pin5: ["QOD"],
  pin6: ["VOUT"]
} as const

export const TPS22918DBVR = (props: SwitchProps) => {
  const { name = "SW1", ...restProps } = props

  return (
    <switch
      name={name}
      pinLabels={pinLabels}
      supplierPartNumbers={{
  "jlcpcb": [
    "C131941"
  ]
}}
      manufacturerPartNumber="TPS22918DBVR"
      footprint={<footprint>
        <smtpad portHints={["pin3"]} pcbX="1.35001mm" pcbY="0.94996mm" width="1.0999978mm" height="0.5999988mm" shape="rect" />
<smtpad portHints={["pin2"]} pcbX="1.35001mm" pcbY="-0mm" width="1.0999978mm" height="0.5999988mm" shape="rect" />
<smtpad portHints={["pin1"]} pcbX="1.35001mm" pcbY="-0.94996mm" width="1.0999978mm" height="0.5999988mm" shape="rect" />
<smtpad portHints={["pin6"]} pcbX="-1.35001mm" pcbY="-0.94996mm" width="1.0999978mm" height="0.5999988mm" shape="rect" />
<smtpad portHints={["pin5"]} pcbX="-1.35001mm" pcbY="-0mm" width="1.0999978mm" height="0.5999988mm" shape="rect" />
<smtpad portHints={["pin4"]} pcbX="-1.35001mm" pcbY="0.94996mm" width="1.0999978mm" height="0.5999988mm" shape="rect" />
<fabricationnotepath route={[{"x":-0.899998200000141,"y":1.5499080000000731},{"x":0.9000236000000541,"y":1.5499080000000731}]} />
<fabricationnotepath route={[{"x":-0.899998200000141,"y":-1.5501111999999466},{"x":0.9000236000000541,"y":-1.5501111999999466}]} />
<silkscreencircle pcbX="1.397mm" pcbY="-1.651mm" radius="0.127mm" strokeWidth="0.15mm" />
<fabricationnotetext text={name} pcbX="0.012446mm" pcbY="2.562354mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-2.1425540000000183,"y":1.8123540000000276},{"x":2.167445999999927,"y":1.8123540000000276},{"x":2.167445999999927,"y":-2.015045999999984},{"x":-2.1425540000000183,"y":-2.015045999999984},{"x":-2.1425540000000183,"y":1.8123540000000276}]} />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C131941.obj?uuid=229b69761e2c45dba6a83d8866dec72d",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C131941.step?uuid=229b69761e2c45dba6a83d8866dec72d",
        pcbRotationOffset: 180,
        modelOriginPosition: { x: 0.000025399999913133797, y: -0.0000889000000370288, z: -0.048939 },
      }}
      {...restProps}
    />
  )
}