AnasSarkiz/rp2040-usb-c-single-axis-dm542t-motion-controller--01a0e89c
A USB‑C RP2040 controller board with external QSPI flash, crystal clock, regulated 3.3/1.1/5 V power, boost-converted motor-driver supply, protected USB and limit inputs, status LEDs, reset/boot switches, and AO3400A MOSFET outputs for stepper-control signals.
- Version
- 0.1.0-prototype.19
- License
- unset
- Stars
- 0
dist/validation/routed-connectivity.json
{
"circuit_sha256": "7c21065dccbe81cac9a1b11166c6343d3d1007687827928e2905b5094563de6c",
"method": "Union physical pad, trace and pour copper per layer; join layers only at plated holes/vias. Conservative minimum endpoint width for tapered segments; geometric join tolerance 0.0000001 mm. Shorts require the separate native raster/gerber check.",
"nets": {
"VDRV": {
"required_ports": 9,
"physical_clusters": 1,
"missing_ports": []
},
"BOOST_L2": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"GND": {
"required_ports": 71,
"physical_clusters": 1,
"missing_ports": []
},
"BOOST_L1": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"DRIVER_VIN": {
"required_ports": 6,
"physical_clusters": 1,
"missing_ports": []
},
"DRIVER_REG_ENABLE": {
"required_ports": 3,
"physical_clusters": 1,
"missing_ports": []
},
"DRIVER_FB": {
"required_ports": 3,
"physical_clusters": 1,
"missing_ports": []
},
"V5": {
"required_ports": 9,
"physical_clusters": 1,
"missing_ports": []
},
"DRIVER_POWER": {
"required_ports": 3,
"physical_clusters": 1,
"missing_ports": []
},
"DRIVER_FAULT": {
"required_ports": 3,
"physical_clusters": 1,
"missing_ports": []
},
"DRIVER_ILIM": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"SUPERVISOR_RESET": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"V3V3": {
"required_ports": 29,
"physical_clusters": 1,
"missing_ports": []
},
"V1V1": {
"required_ports": 7,
"physical_clusters": 1,
"missing_ports": []
},
"XIN": {
"required_ports": 3,
"physical_clusters": 1,
"missing_ports": []
},
"XOUT": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"SWCLK": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"SWDIO": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"RUN": {
"required_ports": 5,
"physical_clusters": 1,
"missing_ports": []
},
"MCU_DM": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"MCU_DP": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"QSPI_D3": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"QSPI_CLK": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"QSPI_D0": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"QSPI_D2": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"QSPI_D1": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"QSPI_CS": {
"required_ports": 4,
"physical_clusters": 1,
"missing_ports": []
},
"STEP": {
"required_ports": 3,
"physical_clusters": 1,
"missing_ports": []
},
"DIR": {
"required_ports": 3,
"physical_clusters": 1,
"missing_ports": []
},
"ENABLE": {
"required_ports": 3,
"physical_clusters": 1,
"missing_ports": []
},
"ARM": {
"required_ports": 3,
"physical_clusters": 1,
"missing_ports": []
},
"LIMIT_MIN": {
"required_ports": 4,
"physical_clusters": 1,
"missing_ports": []
},
"LIMIT_MAX": {
"required_ports": 4,
"physical_clusters": 1,
"missing_ports": []
},
"STATUS": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"VBUS_SENSE": {
"required_ports": 4,
"physical_clusters": 1,
"missing_ports": []
},
"USB_DP": {
"required_ports": 5,
"physical_clusters": 1,
"missing_ports": []
},
"USB_DM": {
"required_ports": 5,
"physical_clusters": 1,
"missing_ports": []
},
"VBUS": {
"required_ports": 5,
"physical_clusters": 1,
"missing_ports": []
},
"FUSED_VBUS": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"LIMIT_MIN_WIRE": {
"required_ports": 4,
"physical_clusters": 1,
"missing_ports": []
},
"LIMIT_MAX_WIRE": {
"required_ports": 4,
"physical_clusters": 1,
"missing_ports": []
},
"CC1": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"CC2": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"XTAL_OUT": {
"required_ports": 3,
"physical_clusters": 1,
"missing_ports": []
},
"BOOT_SW": {
"required_ports": 3,
"physical_clusters": 1,
"missing_ports": []
},
"LED_PWR": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"LED_STATUS": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"STEP_GATE": {
"required_ports": 3,
"physical_clusters": 1,
"missing_ports": []
},
"PUL_MINUS": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"STEP_RETURN": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"ARM_GATE": {
"required_ports": 3,
"physical_clusters": 1,
"missing_ports": []
},
"DIR_GATE": {
"required_ports": 3,
"physical_clusters": 1,
"missing_ports": []
},
"DIR_MINUS": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"DISABLE_GATE": {
"required_ports": 3,
"physical_clusters": 1,
"missing_ports": []
},
"ENA_MINUS": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
},
"ENABLE_GATE": {
"required_ports": 3,
"physical_clusters": 1,
"missing_ports": []
},
"DRIVER_FB_SERIES": {
"required_ports": 2,
"physical_clusters": 1,
"missing_ports": []
}
},
"failed_nets": [],
"shorted_net_groups": [
[
"ARM",
"DIR",
"DRIVER_FAULT",
"DRIVER_POWER",
"DRIVER_REG_ENABLE",
"ENABLE",
"GND",
"QSPI_CLK",
"QSPI_D0",
"QSPI_D2",
"QSPI_D3",
"STEP",
"V3V3"
],
[
"RUN",
"SWCLK"
],
[
"MCU_DM",
"MCU_DP"
]
]
}
Related Packages
More from this authorAnasSarkiz/ble-pedometerThis code defines and configures various electronic hardware components such as surface-mount resistors, crystals, diodes, transistors, connectors, and switches with their physical footprints, schematic symbols, and 3D CAD models for PCB assembly.
Similar packageaura/diy-power-delivery-triggerThis hardware design implements a USB Type-C port with supporting power management and signal conditioning components, including a USB-C connector, a FUSB302 USB-C port controller, ESD protection diodes, a buck converter for 3.3V power regulation, an STM32 microcontroller for control and processing, an RGB LED indicator, push button, terminal block connections, and associated filtering and support components.
Discover something newseveibar/am3352-dev-board-4layer-dogboneDefines PCB footprints and pin mappings for a TI AM3352ZCZ100 processor, JST GH connectors, and assembly-part lookup helpers for capacitors, resistors, and headers.