AnasSarkiz/NEMA14_RP2040

A NEMA motor assembly concept with a controller board, four proposed M3 screws and spacers, motor lead splices, and a JST 4-pin connector harness.

Version
1.13.0
License
ISC
Stars
0

imports/supplier/FRL0805FR240TS/FRL0805FR240TS.tsx

import React from "react"
const objPath = "https://raw.githubusercontent.com/AnasSarkiz/NEMA14_RP2040/4121abe07485b9b255c787decec68f6dc0cac1b0/imports/supplier/FRL0805FR240TS/FRL0805FR240TS.obj"
const stepPath = "https://raw.githubusercontent.com/AnasSarkiz/NEMA14_RP2040/4121abe07485b9b255c787decec68f6dc0cac1b0/imports/supplier/FRL0805FR240TS/FRL0805FR240TS.step"
import type { ResistorProps } from "@tscircuit/props"

export const FRL0805FR240TS = (props: Omit<ResistorProps, "resistance">) => {
  const { name = "R1", ...restProps } = props

  return (
    <resistor
      name={name}
      resistance="240mohm"
      supplierPartNumbers={{
  "jlcpcb": [
    "C2930216"
  ]
}}
      manufacturerPartNumber="FRL0805FR240TS"
      footprint={<footprint>
        <smtpad portHints={["pin2"]} pcbX="0.999998mm" pcbY="0mm" width="1.1325352mm" height="1.3770102mm" shape="rect" />
<smtpad portHints={["pin1"]} pcbX="-0.999998mm" pcbY="0mm" width="1.1325352mm" height="1.3770102mm" shape="rect" />
<silkscreenpath route={[{"x":0.4761991999999964,"y":-0.9170924000000014},{"x":1.7611343999999463,"y":-0.9170924000000014},{"x":1.7611343999999463,"y":0.9170924000000014},{"x":0.4761991999999964,"y":0.9170924000000014}]} />
<silkscreenpath route={[{"x":-0.47619920000011007,"y":-0.9170924000000014},{"x":-1.7611343999999463,"y":-0.9170924000000014},{"x":-1.7611343999999463,"y":0.9170924000000014},{"x":-0.47619920000011007,"y":0.9170924000000014}]} />
<silkscreentext text="{NAME}" pcbX="0.0127mm" pcbY="1.9144mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-1.8162655999998378,"y":0.9385051000000431},{"x":1.8162655999998378,"y":0.9385051000000431},{"x":1.8162655999998378,"y":-0.9385051000000431},{"x":-1.8162655999998378,"y":-0.9385051000000431},{"x":-1.8162655999998378,"y":0.9385051000000431}]} />
      </footprint>}
      cadModel={{
        objUrl: objPath,
        positionOffset: { x: (0.0) * Math.cos(Number(props.pcbRotation ?? 0) * Math.PI / 180) - (0.0) * Math.sin(Number(props.pcbRotation ?? 0) * Math.PI / 180), y: (0.0) * Math.sin(Number(props.pcbRotation ?? 0) * Math.PI / 180) + (0.0) * Math.cos(Number(props.pcbRotation ?? 0) * Math.PI / 180), z: 0 },
        stepUrl: stepPath,
        pcbRotationOffset: 0,
        modelOriginPosition: { x: 0, y: 0.000012699999842880061, z: 0 },
      }}
      {...restProps}
    />
  )
}