AnasSarkiz/NEMA14_RP2040
A NEMA motor assembly concept with a controller board, four proposed M3 screws and spacers, motor lead splices, and a JST 4-pin connector harness.
- Version
- 1.13.0
- License
- ISC
- Stars
- 0
artifacts/opposite-edge/sense1-shortening.json
{
"removed": [
{
"type": "pcb_trace",
"pcb_trace_id": "review_baseline_review_baseline_same_side_repair_4_SENSE1_0_layer_section_1_run_0_run_0_via_clearance_run_0",
"route": [
{
"route_type": "wire",
"x": 5.600000000000001,
"y": -8.125,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 5.525000000000002,
"y": -8.2,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 5.5,
"y": -8.2,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 5.025000000000002,
"y": -8.674999999999999,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 4.625,
"y": -8.674999999999999,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 3.6750000000000007,
"y": -9.625,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 3.650000000000002,
"y": -9.625,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 3.4750000000000014,
"y": -9.8,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 3.450000000000003,
"y": -9.8,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 3.4250000000000007,
"y": -9.825,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 3.400000000000002,
"y": -9.825,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 2.525000000000002,
"y": -10.7,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 2.5,
"y": -10.7,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 2.4750000000000014,
"y": -10.725,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 2.4250000000000007,
"y": -10.725,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 2.400000000000002,
"y": -10.75,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 2.375,
"y": -10.75,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 2.3500000000000014,
"y": -10.774999999999999,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 1.3000000000000007,
"y": -10.774999999999999,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 1.2750000000000021,
"y": -10.8,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 1.25,
"y": -10.8,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 1.2250000000000014,
"y": -10.825,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 1.1999999999999993,
"y": -10.825,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 1.1750000000000007,
"y": -10.85,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 1.1500000000000021,
"y": -10.85,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 1.125,
"y": -10.875,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 1.0749999999999993,
"y": -10.875,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 1.0500000000000007,
"y": -10.899999999999999,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 1.0250000000000021,
"y": -10.899999999999999,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 1.0,
"y": -10.925,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.9750000000000014,
"y": -10.925,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.9499999999999993,
"y": -10.95,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.9250000000000007,
"y": -10.95,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.9000000000000021,
"y": -10.975,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.875,
"y": -10.975,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.8500000000000014,
"y": -11.0,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.8000000000000007,
"y": -11.0,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.7750000000000021,
"y": -11.024999999999999,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.75,
"y": -11.024999999999999,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.7250000000000014,
"y": -11.05,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.6999999999999993,
"y": -11.05,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.6750000000000007,
"y": -11.075,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.6500000000000021,
"y": -11.075,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.625,
"y": -11.1,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.6000000000000014,
"y": -11.1,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.5749999999999993,
"y": -11.125,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.5250000000000021,
"y": -11.125,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.5,
"y": -11.149999999999999,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.4750000000000014,
"y": -11.149999999999999,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.05000000000000071,
"y": -11.575,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": 0.02500000000000213,
"y": -11.575,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -0.1285,
"y": -11.7335,
"layer": "inner2",
"width": 0.3
}
],
"source_net_id": "source_net_24",
"source_trace_id": "source_trace_200",
"subcircuit_connectivity_map_key": "unnamedsubcircuitsubcircuit_source_group_0_connectivity_net52",
"subcircuit_id": "subcircuit_source_group_0",
"pcb_port_ids": []
},
{
"type": "pcb_trace",
"pcb_trace_id": "same_side_repair_34_SENSE1_0",
"route": [
{
"route_type": "wire",
"x": -0.1285,
"y": -11.7335,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -0.3000000000000007,
"y": -11.725,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -0.3249999999999993,
"y": -11.7,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -0.375,
"y": -11.7,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -0.3999999999999986,
"y": -11.675,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -0.4499999999999993,
"y": -11.675,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -0.47499999999999787,
"y": -11.649999999999999,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -0.5500000000000007,
"y": -11.649999999999999,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -0.5749999999999993,
"y": -11.625,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -0.625,
"y": -11.625,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -0.6499999999999986,
"y": -11.6,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -0.7249999999999979,
"y": -11.6,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -0.75,
"y": -11.575,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -0.8000000000000007,
"y": -11.575,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -1.25,
"y": -11.125,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -1.25,
"y": -10.975,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -1.2249999999999979,
"y": -10.95,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -1.2249999999999979,
"y": -10.875,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -1.1999999999999993,
"y": -10.85,
"layer": "inner2",
"width": 0.3
},
{
"route_type": "wire",
"x": -1.1999999999999993,
"y": -10.825,
"layer": "inner2",
"width": 0.3
}
],
"source_net_id": "source_net_24",
"source_trace_id": "source_trace_200",
"subcircuit_connectivity_map_key": "unnamedsubcircuitsubcircuit_source_group_0_connectivity_net52",
"subcircuit_id": "subcircuit_source_group_0",
"pcb_port_ids": []
}
],
"reason": "Remove diagonal sense trunk that cages adjacent motor-phase escape; replace with shorter route"
}
Related Packages
More from this authorAnasSarkiz/testDefines a PCB layout with a JST PH 2-pin connector labeled "J1".
Similar packageimrishabh18/rp2040-motor-controllerAn RP2040-based NEMA17 stepper-motor controller with USB-C programming and PD motor-power negotiation, DRV8825 dual H-bridge drive, current/temperature telemetry, protected power filtering, status RGB LED, buzzer alarm, and optional magnetic encoder.
Discover something newShiboSoftwareDev/muse-reterminal-e1001-replacementA four-layer ESP32-S3 e-paper carrier board with USB-C power, AMS1117 3.3V regulation, 24-pin FFC interface, reset/boot and user buttons, status LED, decoupling passives, test points, mounting holes, and ground/power planes.