AnasSarkiz/NEMA14_RP2040

A NEMA motor assembly concept with a controller board, four proposed M3 screws and spacers, motor lead splices, and a JST 4-pin connector harness.

Version
1.13.0
License
ISC
Stars
0

artifacts/opposite-edge/charge-pump-plan.json

{
  "constructed_requires_full_verification": true,
  "routes": [
    {
      "net": "CP1",
      "length_mm": 4.677496311010006,
      "layers": [
        "top"
      ],
      "signal_vias": 0,
      "points": [
        [
          1.5001049999999996,
          -12.099972999999999
        ],
        [
          0.3,
          -12.099972999999999
        ],
        [
          0,
          -11.775
        ],
        [
          -2.5201160000000002,
          -11.775
        ],
        [
          -2.5201160000000002,
          -12.29
        ]
      ]
    },
    {
      "net": "CP2",
      "length_mm": 3.490341999999999,
      "layers": [
        "top"
      ],
      "signal_vias": 0,
      "points": [
        [
          1.5001049999999996,
          -12.600352999999998
        ],
        [
          -1.6798840000000002,
          -12.600352999999998
        ],
        [
          -1.6798840000000002,
          -12.29
        ]
      ]
    }
  ],
  "displaced_copper": [
    "reviewed_local_R_SA_pin1_via",
    "same_side_repair_1_VM_SENSE_0_via_85"
  ]
}