AnasSarkiz/NEMA14_RP2040

A NEMA motor assembly concept with a controller board, four proposed M3 screws and spacers, motor lead splices, and a JST 4-pin connector harness.

Version
1.13.0
License
ISC
Stars
0

artifacts/opposite-edge/SLEEP-pulldown-orientation-plan.json

{
  "old_native_component": {
    "type": "pcb_component",
    "pcb_component_id": "pcb_component_58",
    "center": {
      "x": -2.08,
      "y": 9.53
    },
    "width": 2.3132034,
    "height": 0.864006400000001,
    "layer": "top",
    "rotation": 0,
    "source_component_id": "source_component_58",
    "subcircuit_id": "subcircuit_source_group_0",
    "do_not_place": false,
    "obstructs_within_bounds": true,
    "is_allowed_to_be_off_board": false,
    "position_mode": "relative_to_group_anchor",
    "positioned_relative_to_pcb_board_id": "pcb_board_0",
    "display_offset_x": "-2.08",
    "display_offset_y": "9.53",
    "pin1_location": "topside_left"
  },
  "new_native_component": {
    "type": "pcb_component",
    "pcb_component_id": "pcb_component_58",
    "center": {
      "x": -2.08,
      "y": 9.53
    },
    "width": 2.3132034,
    "height": 0.864006400000001,
    "layer": "top",
    "rotation": 180,
    "source_component_id": "source_component_58",
    "subcircuit_id": "subcircuit_source_group_0",
    "do_not_place": false,
    "obstructs_within_bounds": true,
    "is_allowed_to_be_off_board": false,
    "position_mode": "relative_to_group_anchor",
    "positioned_relative_to_pcb_board_id": "pcb_board_0",
    "display_offset_x": "-2.08",
    "display_offset_y": "9.53",
    "pin1_location": "topside_left"
  },
  "changed_coordinate_records": [
    "pcb_smtpad_248",
    "pcb_smtpad_249",
    "pcb_port_256",
    "pcb_port_257",
    "order_paste_257",
    "order_paste_258"
  ],
  "nonpolar_resistor_same_value_and_MPN": true,
  "all_four_logical_record_arrays_unchanged": true,
  "fresh_source_pose_verification_pending": false,
  "requires_full_ground_refill_and_qualification": true,
  "fresh_native_import_pose_matches_saved_copper_contacts": true
}