AnasSarkiz/NEMA14_RP2040
A NEMA motor assembly concept with a controller board, four proposed M3 screws and spacers, motor lead splices, and a JST 4-pin connector harness.
- Version
- 1.13.0
- License
- ISC
- Stars
- 0
artifacts/opposite-edge/A_MINUS-overlong-inner1-replacement.json
{
"removed": [
{
"type": "pcb_trace",
"pcb_trace_id": "same_side_repair_31_A_MINUS_0_layer_section_1",
"route": [
{
"route_type": "wire",
"x": 7.25,
"y": -10.649999999999999,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 7.275000000000002,
"y": -10.625,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 7.725000000000001,
"y": -10.625,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 7.75,
"y": -10.6,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 7.800000000000001,
"y": -10.6,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 7.850000000000001,
"y": -10.55,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 7.875,
"y": -10.55,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 7.900000000000002,
"y": -10.524999999999999,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 7.925000000000001,
"y": -10.524999999999999,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.5,
"y": -9.95,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.575000000000003,
"y": -9.95,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.600000000000001,
"y": -9.925,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.650000000000002,
"y": -9.925,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.700000000000003,
"y": -9.875,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.725000000000001,
"y": -9.875,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.75,
"y": -9.85,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.775000000000002,
"y": -9.85,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.875,
"y": -9.75,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.875,
"y": -9.725,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.900000000000002,
"y": -9.7,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.900000000000002,
"y": -9.675,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.950000000000003,
"y": -9.625,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.950000000000003,
"y": -9.575,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.975000000000001,
"y": -9.55,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.975000000000001,
"y": -7.799999999999999,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 9.850000000000001,
"y": -6.924999999999999,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 9.850000000000001,
"y": -6.899999999999999,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 9.875,
"y": -6.875,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 9.875,
"y": -6.85,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 9.900000000000002,
"y": -6.824999999999999,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 9.900000000000002,
"y": -6.299999999999999,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 13.75,
"y": -2.4499999999999993,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 13.75,
"y": -2.424999999999999,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 13.775000000000002,
"y": -2.3999999999999986,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 13.775000000000002,
"y": -2.375,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 13.825000000000003,
"y": -2.3249999999999993,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 13.825000000000003,
"y": -2.2749999999999986,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 13.850000000000001,
"y": -2.25,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 13.850000000000001,
"y": 0.3000000000000007,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 13.825000000000003,
"y": 0.3249999999999993,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 13.825000000000003,
"y": 0.375,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 13.775000000000002,
"y": 0.4250000000000007,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 13.775000000000002,
"y": 0.4499999999999993,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 13.75,
"y": 0.4750000000000014,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 13.75,
"y": 0.5,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 12.900000000000002,
"y": 1.3500000000000014,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 12.900000000000002,
"y": 2.150000000000002,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 12.875,
"y": 2.1750000000000007,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 12.875,
"y": 2.2250000000000014,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 12.825000000000003,
"y": 2.275000000000002,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 12.825000000000003,
"y": 2.3000000000000007,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 12.8,
"y": 2.325000000000003,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 12.8,
"y": 2.3500000000000014,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 12.575000000000003,
"y": 2.575000000000003,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 12.575000000000003,
"y": 2.6750000000000007,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 12.55,
"y": 2.700000000000003,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 12.55,
"y": 2.75,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 12.5,
"y": 2.8000000000000007,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 12.5,
"y": 2.825000000000003,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 12.475000000000001,
"y": 2.8500000000000014,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 12.475000000000001,
"y": 2.875,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 11.650000000000002,
"y": 3.700000000000003,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 11.650000000000002,
"y": 7.175000000000001,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 11.625,
"y": 7.200000000000003,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 11.625,
"y": 7.25,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 11.575000000000003,
"y": 7.300000000000001,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 11.575000000000003,
"y": 7.325000000000003,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 11.55,
"y": 7.350000000000001,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 11.55,
"y": 7.375,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 11.450000000000003,
"y": 7.475000000000001,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 11.425,
"y": 7.475000000000001,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 11.400000000000002,
"y": 7.5,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 11.375,
"y": 7.5,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 11.325000000000003,
"y": 7.550000000000001,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 11.275000000000002,
"y": 7.550000000000001,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 11.25,
"y": 7.575000000000003,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 10.850000000000001,
"y": 7.575000000000003,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 10.825000000000003,
"y": 7.600000000000001,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 10.8,
"y": 7.600000000000001,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.25,
"y": 10.150000000000002,
"layer": "inner1",
"width": 0.3
},
{
"route_type": "wire",
"x": 8.25,
"y": 10.950000000000003,
"layer": "inner1",
"width": 0.3
}
],
"source_net_id": "source_net_27",
"source_trace_id": "source_trace_177",
"subcircuit_connectivity_map_key": "unnamedsubcircuitsubcircuit_source_group_0_connectivity_net44",
"subcircuit_id": "subcircuit_source_group_0",
"pcb_port_ids": []
}
],
"reason": "30.626 mm phase route exceeds unchanged 8 mm I1 budget; full reroute and qualification required"
}
Related Packages
More from this authorAnasSarkiz/testDefines a PCB layout with a JST PH 2-pin connector labeled "J1".
Similar packageimrishabh18/rp2040-motor-controllerAn RP2040-based NEMA17 stepper-motor controller with USB-C programming and PD motor-power negotiation, DRV8825 dual H-bridge drive, current/temperature telemetry, protected power filtering, status RGB LED, buzzer alarm, and optional magnetic encoder.
Discover something newShiboSoftwareDev/muse-reterminal-e1001-replacementA four-layer ESP32-S3 e-paper carrier board with USB-C power, AMS1117 3.3V regulation, 24-pin FFC interface, reset/boot and user buttons, status LED, decoupling passives, test points, mounting holes, and ground/power planes.