AnasSarkiz/NEMA14_RP2040
A NEMA motor assembly concept with a controller board, four proposed M3 screws and spacers, motor lead splices, and a JST 4-pin connector harness.
- Version
- 1.13.0
- License
- ISC
- Stars
- 0
artifacts/jlcpcb-review/Thermal-Via-Process.csv
Reference,Via,X mm,Y mm,Drill mm,Copper pad mm,Process request
U_PD,thermal_via_U_PD,-13.229754,7.179932,0.3,0.5,"fill, copper cap and planarize; supplier quote and process approval pending"
U_MCU,thermal_via_U_MCU,1.4000000000000001,0.200127,0.3,0.5,"fill, copper cap and planarize; supplier quote and process approval pending"
U_DRV,thermal_via_U_DRV,3.999973,-12.099972999999999,0.3,0.5,"fill, copper cap and planarize; supplier quote and process approval pending"
Related Packages
More from this authorAnasSarkiz/testDefines a PCB layout with a JST PH 2-pin connector labeled "J1".
Similar packageimrishabh18/rp2040-motor-controllerAn RP2040-based NEMA17 stepper-motor controller with USB-C programming and PD motor-power negotiation, DRV8825 dual H-bridge drive, current/temperature telemetry, protected power filtering, status RGB LED, buzzer alarm, and optional magnetic encoder.
Discover something newShiboSoftwareDev/muse-reterminal-e1001-replacementA four-layer ESP32-S3 e-paper carrier board with USB-C power, AMS1117 3.3V regulation, 24-pin FFC interface, reset/boot and user buttons, status LED, decoupling passives, test points, mounting holes, and ground/power planes.